google-site-verification=BLgJRV27nwmlEx5l34GMOrQmiMj0flP4vrYKHOs-55g

DENTAL HANDPIECE REPAIR

TS edge performs the following tests and evaluations on dental handpieces.

Concentricity Evaluation: This tests how much bur deflection is on a specific handpiece. Maintaining International Standards Organization (ISO) of .0011 inches or less.

Revolution & Frequency Measuring: This testing analyzer is a very important part of our service. It measures the noise frequency, and outgoing speed (RPM) of a running handpiece.

Autochuck pull force test: This test measures how many pounds of pull are required to remove a locked bur from the spindle. The industry standard is 4-6 lbs. This measurement will indicate if spindle can be re-used in rebuilding of turbine.
Picture
STANDARD OVERHAUL OF HIGH-SPEED--includes most brands

$89.95
  • Handpiece disassemble/turbine removal
  • Replacement of bearings, O-rings, seals
  • Air and water cleaning
  • Testing under load of 35-40 PSI
  • 6 month warranty
NOTE: IF YOUR HANDPIECE REQUIRES TURBINE REPLACEMENT, OR ANY ADDITIONAL PARTS, THERE WILL BE AN ADDITIONAL CHARGE.
STANDARD OVERHAUL OF LOW-SPEED--includes most brands

$149.95
  • Handpiece disassemble/turbine removed
  • Replacement of bearing,O-Rings,seals
  • Test under load of 35-40 PSI.

NOTE: IF YOUR HANDPIECE REQUIRES TURBINE REPLACEMENT, OR ANY ADDITIONAL PARTS, THERE WILL BE AN ADDITIONAL CHARGE.